Fluke T5-600 Voltage, Continuity and Current Tester with OpenJaw
Basic electrical testers
Comes in a compact design ideal for troubleshooting environments of up to 600 V, this electrical tester allows users to check voltage, continuity, and current. Additionally, this tool comes equipped with OpenJaw measurement, which enables the user to check current up to 100 A without breaking the circuit.
| Stock No. | FLK659612 |
|---|---|
| Manufacturer | Fluke |
| Part No. | T5-600 |
| Supplied/Stocked By | FLUKE |
Fluke T5-600 Offers
An ideal compact troubleshooting tool for up to 600 V environments, this tester is for use to check voltage, continuity, and current. Select volts, ohms, or current, and the tester will do the rest. Additionally, this instrument comes equipped with OpenJaw™ current measurement which enables users to check current up to 100 A without breaking the circuit.
Detachable SlimReach™ test probes are customized for national electrical standards. Plus, its tough test leads accept optional accessories such as clips and specialty probes. The test leads stow neatly in the back of the tester, making it easy to carry in your tool pouch. Add the optional holster and you can clip the tool onto your belt.
Features
- Automatically measures volts ac and volts dc with precise digital resolution
- Displays resistance to 1000 Ω
- Easy and accurate OpenJaw™ current measurement
- Continuity beeper
- Compact design with neat probe storage
- Rugged enough to withstand a 9.8' (3 m) drop
- Detachable SlimReach™ probe tips are customized for national electrical standards
- Test leads accept Fluke accessory test clips
- Overvoltage category: 600 V ac/dc, CAT III
- Stay connected much longer than solenoid type tester
- Auto off mode to conserve battery life
- Optional holster attaches to a belt and neatly stows test leads
- All inputs are protected to EN61010-1 CAT III 600 V rating. UL, CSA
What's included with the Fluke T5-600
- Voltage, Continuity and Current Tester
- 4 mm Detachable Probes
- Instruction Sheet
| General Specifications | |
|---|---|
| Jaw Opening | 0.5" (12.9 mm) |
| Max Wire Size | 1/0 THHN Cable |
| Current Range AC RMS | 0 to 100.0 A |
| Accuracy AC Current (50/60 Hz) | 3% ± 3 counts |
| AC Response | Averaging |
| Voltage Range AC | 0 to 600 V |
| Accuracy AC Voltage | 1.5% ± 2 counts |
| Voltage Range DC | 0 to 600 V |
| Accuracy DC Voltage | 1% ± 1 count |
| Resistance Range | 0 to 1000 Ω |
| Continuity Beeper Threshold | On at <25 Ω, off at >400 Ω |
| Volts Indicator LED Threshold | Guaranteed on by 30 V AC |
| Environmental Specifications | |
| Operating Temperature | 50 to 122°F (10 to 50°C) |
| Storage Temperature | -22 to 140°F (-30 to 60°C) |
| Humidity (Without Condensation) | 0 to 95% at 41 to 86°F (5 to 30°C)0 to 75% at 86 to 104°F (30 to 40°C)0 to 45% at 104 to 122°F (40 to 50°C) |
| Dust/Water Resistance | Yes |
| Operating Altitude | 6561.7' (2000 m) |
| Temperature Coefficient | 0.1 x (specified accuracy)/°C (<18°C or >28°C) |
| Safety Specifications | |
| Overvoltage Category | CAT III 600 V ac/dc (EN61010-1) |
| Agency Approvals | CSA, TUV and CE |
| Maximum Voltage | Between any terminal and earth ground |
| Mechanical Specifications | |
| Calibration Cycle | One-year |
| Current Sensor Opening | 0.5" (12.9 mm) |
| Low Battery Indicator | Yes |
| Battery Type | 2 x AA batteries |
| Battery Life | 200 hour zinc chloride, 400 hour alkaline |
| Dimensions | 1.2 x 2 x 8" (30.5 x 51 x 203 mm) |
| Weight | 0.66 lb (300 g) |